FIBER IN METAL TUBES
UP TO 25 KM
An optical fiber these days can be built to measure different values from the environment such as concentration of hydrogen, immersed light, radioactivity, chemical sensing and much more even in the roughest conditions. As such a fiber is made of glass which is very fragile, it needs a surrounding protection with the advantage to bring the environment directly in contact with the measuring fiber. NBG came up with a special FIMT solution which brings all the requirements in such a product by adding holes through the metal surface. What sounds like a simple solution is demanding highest accuracy in manufacturing as well as good engineering in order to provide a product which is able to provide the best operational performance.
|Wall thickness||0.200 mm|
|Approx. Cable weight||11 kg per km|
|Hole to hole distance||10 mm|
|Hole dimensions||~ 0.90 mm x 1.40 mm|
|Maximum fiber count||8 (250µm)|
|Steel material||Anticorrosive Alloy|
All values, product specifications and other given data are subject to change without notice to improve reliability, function, design or otherwise. Information contained in this data sheet are up-to-date as at the date of issue. As NBG cannot control or anticipate the conditions under which this product may be used, each user should review the information in specific context of the planned use. To the maximum extent permitted by law, NBG will not be responsible for damages of any nature resulting from the use or reliance upon the information contained in this data sheet.
Product overview created by Patrick Weissinger – 21.03.2019